Dura Coat is a polyurethane based, skid-resistant coating which bonds to wood , fiberglass , concrete, plastic, rubber, linoleum and primed metal. It is an extremely flexible coating, which withstands movement of the surface to which it has been properly applied and will not flake, chip, or peel. The aggregate in this one part coating is recycled rubber. There are two advantages to using the rubber as an aggregate: the polyurethane chemically bonds to it and it has a resilient quality, which compliments the flexible nature of the polyurethane. Dura Coat also encapsulates lead paint. Possible applications are for floors, loading docks, walkways, steps, stair nosing and treads, roof tops, boat docks, ramps, ambulance floors, diamond plate on fire trucks, truck beds and trailer floors, floors of aerial buckets, bridges, ship decks, storage tanks, helicopter pads, rusty pipes, runner boards, metal equipment, restroom and shower floors, concrete floors, etc. Dura Grit Tiles combine the coating with our 3/4" thick 1' square modular tiles. This product offers superior slip resistance along with anti-fatigue and drainage properties. Great for food service, slaughterhouses, bars, restaurants, grocery stores and outside wood docks and ramps.

 

TECHNICAL DATA

VEHICLE TYPE: Polyurethane (moisture cured)

FINISH: Semi Gloss

COMPONENTS: One

SOLIDS BY VOLUME: 50.6%

SOLIDS BY WEIGHT: 68%

VQC: 340 grams/liter or 2.9 lbs/gal

SPREAD RATE: Approximately 55 - 60 square feet per gallon with 2 coats @ 15 mils dryfilm thickness

RECOMMENDED DFT: 15 - 20 mls dry

RECOMMENDED WFT: 21 - 28 mls

COLORS: Black, Brick Red, Brown, Cream, Dark Grey, Forest Green, Light Grey, Ocean Blue, Safety ORange, Safety Red, Safety Yellow, Sky Blue, Tan, and White

FLASH POINT: TCC 81° F

BOILING POINT: 132° F

SURFACE PREPARATION: Must be free of dirt, oil, grease, moisture and other contaminants. Primer, etching or blasting may be needed before use.

APPLICATION: Roller, brush, and spray

MIXING: Stir thoroughly before use

STORAGE CONDITIONS: 40°F - 86°F ; Protect from freezing

SHELF LIFE: 1 Year

POT LIFE: 2 - 3 Hours

DRYING TIME:
Dry Time (touch) Approx. 15-45 min
Dry Time (hard) Approx. 12 hours - max cure 7 days

CLEANING: Xylene

THINNING: Xylene

CONDITIONS: Dura Coat can be applied under most climatic conditions

 

 

*Dura Grit tile available through R.C. Musson Rubber Company